cancel
Showing results for 
Search instead for 
Did you mean: 
Data Engineering
Join discussions on data engineering best practices, architectures, and optimization strategies within the Databricks Community. Exchange insights and solutions with fellow data engineers.
cancel
Showing results for 
Search instead for 
Did you mean: 

SQL warehouse failing to start ( Please check network connectivity from the data plane to the control plane )

Cano
New Contributor III

Hi, 

My SQL warehouse is failing to start with the following error message:

Details for the latest failure: Error: [id: InstanceId(i-01b84b6705ff09104), status: INSTANCE_INITIALIZING, workerEnvId:WorkerEnvId(workerenv-3023557811934763-c8cef827-a038-4552-a74d-829ee273d683), lastStatusChangeTime: 1673489057531, groupIdOpt Some(0),requestIdOpt Some(0112-020302-ltb2xfyq-2b759b89-28f3-42ff-b),version 2] with threshold 700 seconds timed out after 704732 milliseconds. Please check network connectivity from the data plane to the control plane. Code: BOOTSTRAP_TIMEOUT Cluster-id (internal): 0112-020302-ltb2xfyq Additional details: {"instance_id":"i-01b84b6705ff09104"}

I followed the steps here https://docs.databricks.com/administration-guide/cloud-configurations/aws/customer-managed-vpc.html#...

All the requirements for security group, subnet, NACLs, route table were met.

I even tried to create a new workspace but that also failed.

I have also attached the log file.

Your urgent help is hugely appreciated.

4 REPLIES 4

Debayan
Databricks Employee
Databricks Employee

Hi, There is a line in the attached logs as below:

[Bootstrap Event] Can reach ohio.cloud.databricks.com: [FAILED]

[Bootstrap Event] DNS output for databricks-prod-artifacts-us-east-2.s3.us-east-2.amazonaws.com: 

Server: 10.187.0.2

Address: 10.187.0.2#53

This means somehow the webapp endpoint cannot reach as per the document: https://docs.databricks.com/administration-guide/cloud-configurations/aws/customer-managed-vpc.html?...

imageCould you please make sure if it has been added and let us know if it helps?

Cano
New Contributor III

Hi @Debayan Mukherjee​ 

Everything is managed through the security group and it allows all traffic. And there is also a NAT gateway associated to the subnet to provide internet connectivity.

I see the Databricks Instances spin up in my AWS account, is there Is anyway I can connect to these instances to a run a few tests?

I have attached a screenshot of both inbound and outbound rules for your viewing.

Please let me know if you have any other suggestions.

Cano
New Contributor III

Please note that I'm not using a customer managed VPC, but a VPC that was created by Databricks when I created the workspace.

Debayan
Databricks Employee
Databricks Employee

Hi @charles okoh​ , Thanks for all the details. I understand it is a default VPC. In that case, could you please raise a support case with Databricks?

Connect with Databricks Users in Your Area

Join a Regional User Group to connect with local Databricks users. Events will be happening in your city, and you won’t want to miss the chance to attend and share knowledge.

If there isn’t a group near you, start one and help create a community that brings people together.

Request a New Group