cancel
Showing results for 
Search instead for 
Did you mean: 
Data Engineering
Join discussions on data engineering best practices, architectures, and optimization strategies within the Databricks Community. Exchange insights and solutions with fellow data engineers.
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

ccs
by New Contributor II
  • 3823 Views
  • 6 replies
  • 2 kudos

Resolved! What would happen it my dynamic IP changed in IP Access list?

On this feature IP access lists IP access lists - Azure Databricks | Microsoft Docs, what we observe is that if your IP is not on the access list, you cannot modify the list via API since you are not on trusted location. What if I specify only 1 IP s...

  • 3823 Views
  • 6 replies
  • 2 kudos
Latest Reply
Ralph_RevoData
New Contributor II
  • 2 kudos

Curious to learn if somebody also figured out a way to solve for the above as we've encountered this situation and are now locked out...

  • 2 kudos
5 More Replies
FerArribas
by Contributor
  • 3514 Views
  • 3 replies
  • 0 kudos

Resolved! Azure Databricks - Difference between protecting the WEB UI with IP Access list or disabling public access?

Hi, Thoroughly investigating the best security practices for accessing the Databricks WEB UI. I have doubts about the difference between protecting the WEB UI with (1) IP Access list (https://learn.microsoft.com/en-us/azure/databricks/security/networ...

  • 3514 Views
  • 3 replies
  • 0 kudos
Latest Reply
Rik
New Contributor III
  • 0 kudos

"In short, would it be the same to configure only the IP of the private endpoint in the IP access list vs disable public access?"The access list doesn't apply to private IPs, only to public IP (internet). Relevant part from the docs:"If you use Priva...

  • 0 kudos
2 More Replies
Rik
by New Contributor III
  • 2246 Views
  • 2 replies
  • 0 kudos

Incorrect error when adding an IP access list

I have disabled the IP Access List on my workspace and am trying to add an IP list through the IP Access List API. However, when adding a list, I get the INVALID_STATE response.The docs mention this is because:"If the new list would block the calling...

  • 2246 Views
  • 2 replies
  • 0 kudos
Latest Reply
Rik
New Contributor III
  • 0 kudos

"One possible workaround could be to (1) temporarily enable the IP Access List feature, (2) add the necessary IP addresses to the list, and then (3) disable the feature again. This way, you can add the IP addresses you need without blocking the curre...

  • 0 kudos
1 More Replies
User15787040559
by Databricks Employee
  • 1136 Views
  • 1 replies
  • 1 kudos

How do you find out if the REST API calls are logged anywhere when you update an IP Access List?

In the example response at https://docs.databricks.com/security/network/ip-access-list.html{ "ip_access_list": { "list_id": "<list-id>", "label": "office", "ip_addresses": [ "1.1.1.1", "2.2.2.2/21" ], "address_co...

  • 1136 Views
  • 1 replies
  • 1 kudos
Latest Reply
User16752239289
Databricks Employee
  • 1 kudos

The workspace audit logs should provide all workspace conf change logs. You can check service accountsManager and action name createWorkspaceConfiguration or updateWorkspaceConfiguration.

  • 1 kudos
Labels